Rdp Azure

02-05-2021
 |  [RAND-100] - Comments



-->

The Remote Desktop Protocol (RDP) connection to your Windows-based Azure virtual machine (VM) can fail for various reasons, leaving you unable to access your VM. The issue can be with the Remote Desktop service on the VM, the network connection, or the Remote Desktop client on your host computer. This article guides you through some of the most common methods to resolve RDP connection issues.

Also, the public RDP ports respond correctly (e.g. I tried to enter using two different Windows 7 client machines, also with no lock. MSTSC version is 6.3.9600.16415, in both machines. I've used both the.rdp file, downloaded from the 'Connect' option in the windows azure dashboard and a brand new RDP connection created by me - same. Nov 16, 2020 To allow access to the RDP Shortpath listener across network security boundaries, you need to configure Azure Network Security Group to allow inbound UDP port 3390. Follow the network security group documentation to create an inbound security rule allowing traffic with following parameters. The Remote Desktop Protocol (RDP) connection to your Windows-based Azure virtual machine (VM) can fail for various reasons, leaving you unable to access your VM. The issue can be with the Remote Desktop service on the VM, the network connection, or the Remote Desktop client on your host computer. On the Connect using Azure Bastion page, enter the username and password for your virtual machine, then select Connect. The RDP connection to this virtual machine via Bastion will open directly in the Azure portal (over HTML5) using port 443 and the Bastion service.

If you need more help at any point in this article, you can contact the Azure experts on the MSDN Azure and Stack Overflow forums. Alternatively, you can file an Azure support incident. Go to the Azure support site and select Get Support.

Quick troubleshooting steps

After each troubleshooting step, try reconnecting to the VM:

  1. Reset Remote Desktop configuration.
  2. Check Network Security Group rules / Cloud Services endpoints.
  3. Review VM console logs.
  4. Reset the NIC for the VM.
  5. Check the VM Resource Health.
  6. Reset your VM password.
  7. Restart your VM.
  8. Redeploy your VM.

Continue reading if you need more detailed steps and explanations. Verify that local network equipment such as routers and firewalls are not blocking outbound TCP port 3389, as noted in detailed RDP troubleshooting scenarios.

Tip

If the Connect button for your VM is grayed out in the portal and you are not connected to Azure via an Express Route or Site-to-Site VPN connection, you need to create and assign your VM a public IP address before you can use RDP. You can read more about public IP addresses in Azure.

Ways to troubleshoot RDP issues

You can troubleshoot VMs created using the Resource Manager deployment model by using one of the following methods:

Rdp Azure
  • Azure portal - great if you need to quickly reset the RDP configuration or user credentials and you don't have the Azure tools installed.
  • Azure PowerShell - if you are comfortable with a PowerShell prompt, quickly reset the RDP configuration or user credentials using the Azure PowerShell cmdlets.

You can also find steps on troubleshooting VMs created using the Classic deployment model.

Troubleshoot using the Azure portal

How to rdp azure vm

After each troubleshooting step, try connecting to your VM again. If you still cannot connect, try the next step.

  1. Reset your RDP connection. This troubleshooting step resets the RDP configuration when Remote Connections are disabled or Windows Firewall rules are blocking RDP, for example.

    Select your VM in the Azure portal. Scroll down the settings pane to the Support + Troubleshooting section near bottom of the list. Click the Reset password button. Set the Mode to Reset configuration only and then click the Update button:

  2. Verify Network Security Group rules. Use IP flow verify to confirm if a rule in a Network Security Group is blocking traffic to or from a virtual machine. You can also review effective security group rules to ensure inbound 'Allow' NSG rule exists and is prioritized for RDP port(default 3389). For more information, see Using Effective Security Rules to troubleshoot VM traffic flow.

  3. Review VM boot diagnostics. This troubleshooting step reviews the VM console logs to determine if the VM is reporting an issue. Not all VMs have boot diagnostics enabled, so this troubleshooting step may be optional.

    Specific troubleshooting steps are beyond the scope of this article, but may indicate a wider problem that is affecting RDP connectivity. For more information on reviewing the console logs and VM screenshot, see Boot Diagnostics for VMs.

  4. Reset the NIC for the VM. For more information, see how to reset NIC for Azure Windows VM. Canon mf3200 series drivers download.

  5. Check the VM Resource Health. This troubleshooting step verifies there are no known issues with the Azure platform that may impact connectivity to the VM.

    Select your VM in the Azure portal. Scroll down the settings pane to the Support + Troubleshooting section near bottom of the list. Click the Resource health button. A healthy VM reports as being Available:

  6. Reset user credentials. This troubleshooting step resets the password on a local administrator account when you are unsure or have forgotten the credentials. Once you have logged into the VM, you should reset the password for that user.

    Select your VM in the Azure portal. Scroll down the settings pane to the Support + Troubleshooting section near bottom of the list. Click the Reset password button. Make sure the Mode is set to Reset password and then enter your username and a new password. Finally, click the Update button:

    Best Female Celebrity Autobiographies You Ought to Read Now! Uncompromisingly personal, with an occasional dollop of gossip, and a whole lot of confessions, a well-written memoir can range from being a spicy beach read to a thought-provoking story. Olympic medalist and two-time Women's World Cup champion Megan Rapinoe shows a whole new side of herself in this memoir, in which she recounts coming out as gay in 2011—well before 'inclusivity in. Female celebrity autobiographies.

  7. Restart your VM. This troubleshooting step can correct any underlying issues the VM itself is having.

    Select your VM in the Azure portal and click the Overview tab. Click the Restart button:

  8. Redeploy your VM. This troubleshooting step redeploys your VM to another host within Azure to correct any underlying platform or networking issues.

    Select your VM in the Azure portal. Scroll down the settings pane to the Support + Troubleshooting section near bottom of the list. Click the Redeploy button, and then click Redeploy:

    After this operation finishes, ephemeral disk data is lost and dynamic IP addresses that are associated with the VM are updated.

  9. Verify routing. Use Network Watcher's Next hop capability to confirm that a route isn't preventing traffic from being routed to or from a virtual machine. You can also review effective routes to see all effective routes for a network interface. For more information, see Using effective routes to troubleshoot VM traffic flow.

  10. Ensure that any on-premises firewall, or firewall on your computer, allows outbound TCP 3389 traffic to Azure.

If you are still encountering RDP issues, you can open a support request or read more detailed RDP troubleshooting concepts and steps.

Remote desktop azure app service

Troubleshoot using Azure PowerShell

If you haven't already, install and configure the latest Azure PowerShell.

The following examples use variables such as myResourceGroup, myVM, and myVMAccessExtension. Replace these variable names and locations with your own values.

Note

You reset the user credentials and the RDP configuration by using the Set-AzVMAccessExtension PowerShell cmdlet. In the following examples, myVMAccessExtension is a name that you specify as part of the process. If you have previously worked with the VMAccessAgent, you can get the name of the existing extension by using Get-AzVM -ResourceGroupName 'myResourceGroup' -Name 'myVM' to check the properties of the VM. To view the name, look under the 'Extensions' section of the output.

After each troubleshooting step, try connecting to your VM again. If you still cannot connect, try the next step.

  1. Reset your RDP connection. This troubleshooting step resets the RDP configuration when Remote Connections are disabled or Windows Firewall rules are blocking RDP, for example.

    The follow example resets the RDP connection on a VM named myVM in the WestUS location and in the resource group named myResourceGroup:

  2. Verify Network Security Group rules. This troubleshooting step verifies that you have a rule in your Network Security Group to permit RDP traffic. The default port for RDP is TCP port 3389. A rule to permit RDP traffic may not be created automatically when you create your VM.

    First, assign all the configuration data for your Network Security Group to the $rules variable. The following example obtains information about the Network Security Group named myNetworkSecurityGroup in the resource group named myResourceGroup:

    Now, view the rules that are configured for this Network Security Group. Verify that a rule exists to allow TCP port 3389 for inbound connections as follows:

    The following example shows a valid security rule that permits RDP traffic. You can see Protocol, DestinationPortRange, Access, and Direction are configured correctly:

    If you do not have a rule that allows RDP traffic, create a Network Security Group rule. Allow TCP port 3389.

  3. Reset user credentials. This troubleshooting step resets the password on the local administrator account that you specify when you are unsure of, or have forgotten, the credentials.

    First, specify the username and a new password by assigning credentials to the $cred variable as follows:

    Now, update the credentials on your VM. The following example updates the credentials on a VM named myVM in the WestUS location and in the resource group named myResourceGroup:

  4. Restart your VM. This troubleshooting step can correct any underlying issues the VM itself is having.

    The following example restarts the VM named myVM in the resource group named myResourceGroup:

  5. Redeploy your VM. This troubleshooting step redeploys your VM to another host within Azure to correct any underlying platform or networking issues.

    The following example redeploys the VM named myVM in the WestUS location and in the resource group named myResourceGroup:

  6. Verify routing. Use Network Watcher's Next hop capability to confirm that a route isn't preventing traffic from being routed to or from a virtual machine. You can also review effective routes to see all effective routes for a network interface. For more information, see Using effective routes to troubleshoot VM traffic flow.

  7. Ensure that any on-premises firewall, or firewall on your computer, allows outbound TCP 3389 traffic to Azure.

If you are still encountering RDP issues, you can open a support request or read more detailed RDP troubleshooting concepts and steps.

Troubleshoot VMs created using the Classic deployment model

Important

Classic VMs will be retired on March 1, 2023.

Rdp

If you use IaaS resources from ASM, please complete your migration by March 1, 2023. We encourage you to make the switch sooner to take advantage of the many feature enhancements in Azure Resource Manager.

For more information, see Migrate your IaaS resources to Azure Resource Manager by March 1, 2023.

After each troubleshooting step, try reconnecting to the VM.

  1. Reset your RDP connection. Iphone openssh. This troubleshooting step resets the RDP configuration when Remote Connections are disabled or Windows Firewall rules are blocking RDP, for example.

    Select your VM in the Azure portal. Click the ..More button, then click Reset Remote Access:

  2. Verify Cloud Services endpoints. This troubleshooting step verifies that you have endpoints in your Cloud Services to permit RDP traffic. The default port for RDP is TCP port 3389. A rule to permit RDP traffic may not be created automatically when you create your VM.

    Select your VM in the Azure portal. Click the Endpoints button to view the endpoints currently configured for your VM. Verify that endpoints exist that allow RDP traffic on TCP port 3389.

    The following example shows valid endpoints that permit RDP traffic:

    If you do not have an endpoint that allows RDP traffic, create a Cloud Services endpoint. Allow TCP to private port 3389.

  3. Review VM boot diagnostics. This troubleshooting step reviews the VM console logs to determine if the VM is reporting an issue. Not all VMs have boot diagnostics enabled, so this troubleshooting step may be optional.

    Specific troubleshooting steps are beyond the scope of this article, but may indicate a wider problem that is affecting RDP connectivity. For more information on reviewing the console logs and VM screenshot, see Boot Diagnostics for VMs.

  4. Check the VM Resource Health. This troubleshooting step verifies there are no known issues with the Azure platform that may impact connectivity to the VM.

    Select your VM in the Azure portal. Scroll down the settings pane to the Support + Troubleshooting section near bottom of the list. Click the Resource Health button. A healthy VM reports as being Available:

  5. Reset user credentials. This troubleshooting step resets the password on the local administrator account that you specify when you are unsure or have forgotten the credentials. Once you have logged into the VM, you should reset the password for that user.

    Select your VM in the Azure portal. Scroll down the settings pane to the Support + Troubleshooting section near bottom of the list. Click the Reset password button. Enter your username and a new password. Finally, click the Save button:

  6. Restart your VM. This troubleshooting step can correct any underlying issues the VM itself is having.

    Select your VM in the Azure portal and click the Overview tab. Click the Restart button:

  7. Ensure that any on-premises firewall, or firewall on your computer, allows outbound TCP 3389 traffic to Azure.

If you are still encountering RDP issues, you can open a support request or read more detailed RDP troubleshooting concepts and steps.

Troubleshoot specific RDP errors

You may encounter a specific error message when trying to connect to your VM via RDP. The following are the most common error messages:

  • The remote session was disconnected because there are no Remote Desktop License Servers available to provide a license.
  • Remote Desktop can't find the computer 'name'.
  • An authentication error has occurred. The Local Security Authority cannot be contacted.
  • Windows Security error: Your credentials did not work.
  • This computer can't connect to the remote computer.

Additional resources

If none of these errors occurred and you still can't connect to the VM via Remote Desktop, read the detailed troubleshooting guide for Remote Desktop.

  • For troubleshooting steps in accessing applications running on a VM, see Troubleshoot access to an application running on an Azure VM.
  • If you are having issues using Secure Shell (SSH) to connect to a Linux VM in Azure, see Troubleshoot SSH connections to a Linux VM in Azure.

I have a VM that is joined to my Azure AD test tenant domain. I was having issues using RDP to access the box with my Azure AD credentials (username@tenant.onmicrosoft.com). I kept getting the following when trying to connect:

So I started researching and found that this was an common issue that many have started to face with their Azure AD Joined machines. Unfortunately, at this time it isn’t quite as easy as “open up a new RDP connection, type in the computer, type my email, and connect”. Here are the steps to connect a session to that Azure AD joined computer.

Steps to connect RDP to an Azure AD joined computer.

First, open remote desktop as if you were going to connect to any other computer. Type in the computer name or IP address and expand the the Show Options section. Next, click the Save As button to save the RDP file to your computer. At this point you can close the Remote Desktop Connection window as it isn’t needed any longer.

Next, open Notepad. Click File -> Open -> location your RDP file that was saved in the previous step.

Go to the very bottom of the list of parameters and add the following two lines:
enablecredsspsupport:i:0
authentication level:i:2

Save the changes to the .rdp file

Rdp Azure Vm Internal Error

NOTE: You can also add your username that will be used to connect to the session in the file as well:
username:s:.AzureADYOURusername@YOURtenantname.onmicrosoft.com

Azure Cloud Service Rdp

Now you are ready to connect! Double click on the RDP file and connect to the Azure AD Joined computer.

KEEP RESEARCHING!
STAY POSITIVE! THE WORLD WILL CHANGE FOR THE BETTER FOR ALL OF US!

How To Rdp Azure Vm

REFERENCES:
Remote Desktop to Azure AD Joined Computer